Rust-proof, rot-proof aluminum fencing that looks sharp for decades with almost no maintenance. Our licensed crew installs every aluminum style across Wake County and the Triangle — ornamental, pool-code, and commercial-grade builds.
Aluminum fencing gives you the open, elegant look of wrought iron at a fraction of the cost and weight — and none of the rust. It holds its finish in Raleigh’s humidity and summer heat without a single coat of paint or rust treatment. Powder-coated at the factory in black, bronze, or white, it keeps its color for decades. Most Triangle HOAs love it because it looks polished and traditional without the heavy maintenance of iron. If you want a fence that works hard and looks great doing it, aluminum is the call.
Heavier wall thickness, thicker pickets, and deeper-set posts. Built for properties that need maximum strength — pool enclosures, commercial boundaries, and high-traffic areas. Backed by a lifetime finish warranty and rated for decades of heavy use.
The right choice for most Raleigh homeowners. Lighter profile, easier installation, and costs 15–20% less than commercial grade. Still fully rust-proof, still powder-coated, and still the cleanest-looking fence option for HOA neighborhoods and front yards.
Not sure which grade fits your project? We’ll walk you through the options at your free estimate — no pressure, just honest advice.
Clean, modern picket tops with no decorative finials. The most popular aluminum style in Raleigh HOA communities — simple, sharp, and meets most HOA fence guidelines right out of the box.
Pointed finials on each picket give a classic wrought-iron appearance at a fraction of the cost and weight. Popular for front yards, pool enclosures, and properties where a traditional elegant look matters.
Shorter picket spacing at the bottom rail to keep small dogs and pets safely inside while maintaining the open, elegant look of standard aluminum. A practical choice for families with small pets in Wake County neighborhoods.
Built to meet North Carolina pool barrier codes — minimum 48" height, self-closing and self-latching gate hardware, and picket spacing that meets local inspection requirements. We handle the permit and inspection process on every pool fence install.
Dialed in for Raleigh’s soil, HOA requirements, and pool codes — not a generic install.
3′, 4′, 5′, or 6′ — confirmed against your HOA rules and Wake County zoning. Pool enclosures require 48″ minimum by NC code.
Aluminum posts set in concrete footings — no rust, no rot, no annual treatment. Heavy-duty post caps included on every install.
Textured black (most popular), bronze, and white powder-coat finishes. Color is baked in at the factory — never needs painting.
Single walk (36″) or double drive (10’–12′) gates — self-closing hinges and drop-rod or keyed latch hardware included on every gate.
We build pool fence to NC barrier code requirements including 48″ minimum height, self-latching gates, and max 4″ picket spacing. Permit and inspection handled by us.
We research and pull Wake County and city permits on your behalf — included in every install at no extra charge.
No hidden fees, no surprise add-ons. What’s on your quote is what gets built — period.
We visit your yard, take accurate measurements, and walk through every style, color, and height option with you.
Detailed written quote within 48 hours — every panel, post, gate, and permit fee listed out clearly.
We pull all required permits and handle HOA submittals. For pool fences, we manage the full NC barrier code inspection process.
Our crew installs your aluminum fence (usually 1–2 days). We walk it with you when it's done and make sure everything is right.
Most aluminum fence installs in the Raleigh area fall into these ranges installed:
Residential-Grade, 4′ tall
$28–$44 / linear ft
Commercial-Grade or Pool Code, 4’–6′
$44–$68 / linear ft
Add-ons
Gates, puppy picket upgrade, pool latch hardware, terrain
Final pricing depends on style, grade, gate count, and your yard’s grade. The number on your written quote is the number you pay — always.
Our quote is the price you pay. We’ve never sent a “supplemental invoice” in 20 years of installing fences in Raleigh.
“Quoted, installed, and done — exactly to the dollar.”
— Recent Apex, NC homeowner
We install aluminum fences across Raleigh, Cary, Apex, Durham, and every city in the Triangle. Same crew, same warranty, no extra travel fees in any city we serve.
A quality aluminum fence typically lasts 30–50 years in Raleigh’s climate with virtually no maintenance. The powder-coat finish resists fading, chipping, and corrosion for decades. Unlike wood, there’s no rotting or warping, and unlike iron, there’s no rusting. It’s one of the longest-lasting fence options available for NC homeowners.
No — aluminum does not rust. It’s made from an alloy that is naturally corrosion-resistant, and the factory powder-coat finish provides an additional protective barrier. North Carolina’s humidity, rain, and coastal salt air have no effect on aluminum fence. That’s one of the main reasons it’s become so popular across the Triangle.
Yes — aluminum is one of the most HOA-accepted fence materials in Wake County. Most HOAs in Raleigh, Cary, and Apex list black aluminum as a pre-approved style. We’re familiar with Triangle HOA requirements and can help you prepare your approval submittal before we begin work.
Most aluminum fences 4 feet and under do not require a permit in unincorporated Wake County. Pool enclosures and fences in city limits — Raleigh, Cary, Apex — often do require permits. We research your specific address and handle all permit applications at no extra charge on every install.
Yes — aluminum is actually the most common material used for pool enclosures in the Triangle because it meets NC pool barrier code requirements and never rusts or corrodes around water. We build pool fences to the required 48″ minimum height, install self-closing and self-latching gate hardware, and handle the permit and code inspection process for you.
Aluminum looks nearly identical to wrought iron but costs 40–60% less and weighs significantly less — making it easier to install and far less likely to shift over time. The biggest difference: wrought iron rusts without regular maintenance. Aluminum never does. For most Raleigh homeowners, aluminum is the smarter long-term choice.
Yes. Old fence removal and off-site disposal is included in your quote — no surprise fees. We haul everything away. If you want to keep any materials, just mention it at the estimate and we’ll set them aside for you.
Free on-site estimate. Honest written pricing. A real local crew that shows up when we say and builds it right.
Or call us at (919) 555-0142 — Mon–Sat, 7:30am–6pm.
Cedar and pressure-treated pine privacy built for NC weather.
Zero-maintenance privacy that stays clean and bright for decades.
Practical, durable utility fencing for any lot or budget.
Restore an aging fence to like-new condition — no full replacement.
RALEIGH, NC
Free, honest estimates from a real Raleigh crew. We will walk your property, answer every question, and hand you a written quote with no obligation to proceed.
